Stock up on Automatic Waterer Parts before winter. Use coupon code WATERERPARTS to save $10 on orders over $100 on small parts.
All products ship within the same or next business day unless noted. Shipping takes between 2-5 days, Freight 1-2 weeks.
Need a freight quote on large items? Click Here.
Miraco Waterers
Miraco Waterer Parts
Shop by Miraco Parts Lists
Ritchie Waterers and Parts
Shop by Ritchie parts list
Shop Discontinued Ritchie
Classic Equine by Ritchie
Trojan Waterers & Nipples
JUG Waterers
Shop by JUG Waterer Parts
Franklin Waterers
Shop Discontinued Franklin
Petersen Concrete
Behlen Country
Pride of the Farm
Tusker Livestock
​
Brower Waterer VP226 1/2" Brass Valve with 1/8" Orifice High Pressure
The Brower VP2 valve is the next generation vale which replaces the VP1 valve series. The VP2 provides simplicity with few moving parts and has the following features.
The VP226 features a brass threaded body for longevity and durability. The 1/8" orifice allows to handle higher water pressure situations.
- Greater flow rate due to the plunger traveling a longer distance
- Greater tolerance to operation in dirty conditions
- No diaphragm, cam link or power link which means fewer maintenance items.
Easily replaces the VP1 valve and designed with fewer parts to create increased water flow.
NOTE: The fully assembled valve part numbers are VP221, VP223, VP224, VP226, VP227. The last 2 numbers on VP2 match up with the VP1 valve. If your drinker originally took the VP124, order a VP224, etc.
TIP: If you want to replace a VP1 valve with a VP2 valve, the base and assembly nut can remain connected to your water supply line.
Valve hook up suggestions for better service
- Flush lines thoroughly to remove all foreign material
- DURAPRIDE Valve should not be subjected to excessive tool pressures at any time
- Hold inlet pipe securely while connecting to water supply line
- Knurled ring o valve to be hand tightened only. When replacing valve base to pip fittings- use Teflon tape or pipe seal, hand tighten plus one half turn with 1" socket of box end wrench.
VP2 Maximum Shut-Off Pressure (PSI) in Relation to orifice Size and Float Arm Length | ||
VP24 - 18/" Orifice | VP26 - 1/4" Orifice | |
VA225P - 1-1/8" Arm | 100 PSI | 40 PSI |
WC725P - 2-1/2" Arm | 120 PSI | 65 PSI |
WC725P - 3-5/8" Arm | 130 PSI | 85 PSI |
VA4 - 4" Arm | 130 PSI | 85 PSI |
VA6 - 6" Arm | 130 PSI | 85 PSI |
Valve Flow Rates | ||
Valve Number: Orifice Number: |
VP223 VP226 VP227 VP24 - 1/8"(.125) |
VP221 VP224 VP26-1/4"(.250) |
PSI | Gallons Per Minute | |
25 | 1.1 | 4.2 |
40 | 1.3 | 7.5 |
60 | 1.6 | 9.2 |
90 | 1.9 | 9.7 |
Orifices are interchangeable on all valves.