Durapatch is a very unique, easy-to-use UV or sunlight activated, self-adhesive repair patch. It is reinforced Polyester with extremely good adhesion properties for long-lasting repairs. The patch is non-flammable, non-toxic, and the adhesive is not harmful to the skin. Easy to apply, no mixing, no weighing – one step, no mess.

• Easy Application
• Fast Cure (15-30 mins)
• Molds to any application
• Impact Resistant
• Can be drilled, sanded or painted
• Cures rock hard
• Rot-proof & Waterproof

Applying Durapatch Repair Patch is as easy as 1...2...3

1. Surface should be clean, dry and free of any contaminates. Cut patch into any size you want without exposing to UV/sunlight. Place remaining material back in foil protective bag.

2. Remove white backing tape to expose the sticky resin. Apply patch to repair area with sticky side down and press firmly to make sure that the patch seals the entire area.

3. Remove the film backing on the top side and expose to UV or sunlight. Curing times depend on UV intensity, between 5 minutes (sunny) and 50 minutes (cloudy) or use a UV light indoors with a minimum of 51 Lumens.

Can be used on

• Polyethylene
• Steel
• Wood
• Stone
• Concrete
• Fiberglass
• Most Plastics

The Durapatch is extremely durable, reinforced polyester/plastic. It's flexible and waterproof that can be drilled, tapped, sanded or painted in less than an hour. The patch will not rot or and is rust resistant against many chemicals, solvents, and oils. Weather and UV resistant. Temperature resistant from -40 degrees celsius to 200 degrees celsius. Bond to all surfaces except polypropylene (PP). No Shrinkage or expansion during the application or after curing. Fast curing.

Model DP912